Steinberg Systems SBS-KW-300AW Mode D'emploi page 11

If weight is over 100%F.S., or less than 0, tare is not allowed.
If weight is not stable or held, tare is not allowed.
Taring will reduce scale's apparent overloading range. E.g., if a 10kg container is tared
and scale's maximum capacity is 50kg, scale will overload at a new weight of 40.18kg
(5000 – 1000 + additional 9 divisions).
Press to restore tare
"TARE" hides, and weight resumes in gross mode.
HOLD
Press to lock the display.
EN
"HOLD" shows and display is frozen.
Press again to resume display.
"HOLD" hides and display resume refreshing
UNIT SWITCH
Press for 1 second to switch measuring unit between kg, lb and N.
21
If scale is tared, or held, unit switching is not allowed
ZERO
Press for 1 second to zero scale
"ZERO" shows and weight turns zero.
If weight is tared, or not stable, or held, zero is not allowed.
If weight is over Manual-Zero range, zero is not allowed.
SETTING applicable to scale models SBS-KW-300AW, SBS-KW-300AB and SBS-
KW-300AR
Press and simultaneously, and hold two buttons for 1 second, to enter
Setting Mode
Press to enter Auto-Off option; and press
Auto-Off can be set to 0 (disabled), 5 (5min), 15 (15min), 30 (30min), 60 (60min).
to change Auto-Off option.
22
EN