/ Installation
INSTALLATION
APPLIANCE INSTALLATION
Unpacking the rangetop
•
Remove all packing materials from the
shipping pallet but leave the adhesive-backed
foam layer over brushed-metal surfaces to
protect it from scratches until the range is
installed in its fi nalposition. Only the fi lm on
the side panels should be removed before
inserting the rangetop between the cabinets.
•
Examine the appliance after unpacking it. In
the event of transport damage, do not plug
it. Take pictures of the damage and report it
immediately to the freight forwarder.
•
The grates, griddle plate, burner caps, and
oven racks should be removed to facilitate
handling.
•
INSTALLING THE WORKTOP
FRONTGUARD
To increase the clearance between the front edge
of the worktop and the burners, it is possible to
install a front guard for the worktop.
To install the front guard,
•
Locate the two fi xing holes on the end of the
front guard.
•
Locate the two fi xing holes on the bottom facet
of the worktop
•
Fix the front guard with it's two screws
14