Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
APPLIANCE INSTALLATION
Unpacking the range
•
Remove all packing materials from the ship-
ping pallet but leave the adhesive-backed foam
layer over brushed-metal surfaces to protect it
from scratches until the range is installed in its
fi nalposition. Only the fi lm on the side panels
should be removed before inserting the range
between the cabinets.
•
Examine the appliance after unpacking it. In the
event of transport damage, do not plug it. Take
pictures of the damage and report it immedia-
tely to the freight forwarder.
•
Remove the oven door(s). This will reduce the
weight of the range.
•
The grates, griddle plate, burner caps, and oven
racks should be removed to facilitate handling.
•
Before moving the range, protect the fl oor to
prevent damage.
REMOVING THE OVEN DOOR
Prepare the door for removal. Flip up the locking
clamps on each door hinge. Slowly shut the door
until the protruding clamps stop the movement.
Pull oven door upwards and remove.
Do not lift or carry the oven door by its handle!
This may damage the hinges.
/ Installation
1
2
3
13
Publicité
Chapitres
Table des Matières
