Always assemble the appliance completely for storage. This guarantees that the blades
cannot be touched unintentionally.
Always wait until the motor has stopped completely before disassembling, moving or
cleaning the appliance.
Caution risk of accidents, injury and damage!
Before use always make sure that the appliance is properly and completely assembled.
Do not operate the appliance when the appliance or any parts of it are damaged to avoid
all risks. The appliance is damaged when there are any cracks, excessively broken or
frayed parts, distortions or leaks, or when the gear on the motor base stalls or sticks.
In this case, immediately stop using the appliance pull the plug and return the appliance
(including any parts and accessories) to an authorized service centre for check and repair.
Do not attempt to use the appliance by using any parts or accessories not recommended
by the manufacturer. This is dangerous and can cause injury to user and damage to the
appliance.
Place the appliance on a stable, flat and dry surface which is large enough to work without
any trouble to eliminate the risk of falling down. Do not place the appliance near edges of
table or counter. Place it as closed as possible to the power socket. Take care that the cord
never hangs over the edges of furniture and nobody can smash the appliance down by
pulling the cord. Do not place the appliance on or near a hot gas or electric burner or on
a heated oven and take care that the cord also never touches hot surfaces or sharp-edged
objects. Do not place any kind of tissues or cloth under or on the appliance to avoid the risk
of electrical shock or fire.
Caution! Always switch off (power switch position "0") the appliance immediately and
unplug after each use.
Scope of delivery
Motor unit
Pusher
Filling tray
Meat grinder
Locking screw for meat grinder
Spiral drive
Star cutter
Locking screw for the cutting discs
Coarse, medium and fine cutting disc
Kebbe disc
Kebbe ring
Sausage filling attachment
Instruction manual
Before the first use
Carefully read and follow all instructions and safeguards before operating.
Remove all packaging, foils etc. Ensure that the unit is in perfect order and all parts are
delivered.
17