Components - Meister MWS1100-125 Traduction Du Manuel D'utilisation Original

• The specified vibration emission
value can also be used for an in-
troductory evaluation of the influ-
ence.
Information about minimising
vibrations
Warning: The actual vibration
emission value present during
the use of the machine may deviate
from the specification given in the
operating instructions or determined
by the manufacturer. This may be
caused by the following influencing
factors that should be taken into ac-
count prior to and during each use:
• Is the device being used correctly
• Is the correct type of material
being processed
• Is the device in proper working
order
• Are the handles or optional vibra-
tion handles mounted and fixed
securely up against the body of
the machine.
If your hands experience an unpleas-
ant sensation or the skin changes
colour whilst you are using the ma-
chine, stop using the machine imme-
diately. Take sufficient breaks. If you
do not take sufficient breaks, this
may lead to a hand/arm vibration
syndrome.
An estimate of the level of load in
conjunction with the work or use of
the machine should be carried out
and breaks set out accordingly. This
method can be used to considerably
minimise the level of load during the
62
entire working time. Minimise risks in
MW-5455140-Bedien-2005.indd 62 MW-5455140-Bedien-2005.indd 62
which you are exposed to vibrations.
Take care of your machinery in ac-
cordance with the directions in the
operation instructions.
If the machine is to be used fre-
quently, contact your dealer and ar-
range anti-vibration equipment (han-
dles) if necessary.
Avoid using the tool in temperatures
of t = 10 °C or lower. Draw up a
working schedule which can be used
to minimise vibration loads.
Information about minimising
noise
A certain amount of noise is una-
voidable when using this device.
Ensure you carry out noise-intensive
work during permitted times.
Maintain the quiet periods and limit
your work to the absolute minimum.
For the sake of your personal pro-
tection and the protection of per-
sons in close proximity, suitable ear
defenders should be worn.
3 – Components
1 Main handle
2 Power cable
3 On/Off switch
4 Mounting points for additional
handle
5 Disc cover for grinding discs
6 Unlocking lever for disc cover
6a Clamping nut for unlocking
lever
7 Lugs
8 Spindle with connection thread
13.05.20 10:01 13.05.20 10:01