Meister MWS1100-125 Traduction Du Manuel D'utilisation Original page 66

c Disconnect the plug from the
power source before making
any adjustments, changing ac­
cessories, or storing power
tools. Such preventive safety
measures reduce the risk of start-
ing the power tool accidentally.
d Store idle power tools out of the
reach of children and do not
allow persons unfamiliar with
the power tool or these instruc­
tions to operate the power tool.
Power tools are dangerous in the
hands of untrained users.
e Maintain power tools. Check for
misalignment or binding of mov­
ing parts, breakage of parts and
any other condition that may af­
fect the power tool's operation.
If damaged, have the power tool
repaired before use. Many acci-
dents are caused by poorly main-
tained power tools.
f Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
g Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi­
tions and the work to be per­
formed. Use of the power tool for
operations different from those in-
tended could result in a hazardous
situation.
66
MW-5455140-Bedien-2005.indd 66 MW-5455140-Bedien-2005.indd 66
5 Service
a Have your power tool serviced
by a qualified repair person
using only identical replacement
parts. This will ensure that the
safety of the power tool is main-
tained.
II. Safety notes for all applications
Shared warning notes regarding
separating and grinding:
Safety precautions separating appli-
cations:
a This electrical tool is to be used
as a grinder and cutting device.
Pay attention to all of the warn­
ing notes, instructions, dia­
grams and data you receive
with the unit. If you do not ob-
serve the following instructions, it
may lead to electrical shock, fire
and/or serious injuries.
b This electrical tool is not suita­
ble for sandpaper sanding,
working with wire brushes, pol­
ishing. Uses for which the tool is
not designed may cause risks and
injury.
c Do not use accessories that
have not been designed and
recommended by the manufac­
turer for use with this electrical
tool. Just because you can affix
an accessory to your electrical
tool, does not guarantee that it is
safe to use.
13.05.20 10:01 13.05.20 10:01