Entering A Destination By Latitude And Longitude - Alpine NVD-A802 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7
Input the entrance name.
• If the number of candidates narrows down to less than
5, the display automatically shows the Select Entrance
Name screen.
• For details on how to input, see page 11.
The Select Entrance Name screen is displayed.
8
Touch the desired entrance name.
Select (highlight) the desired entrance name by
tilting the joystick and press ENTER.
Select Freeway Entrance screen
Select Entrance Name screen
• If more than one entrance in the selected entrance name
exists, the Select Entrance screen is displayed.
• For details on how to use the list, see page 11.
The Confirm Destination screen appears.
9
Touch [OK to Proceed].
Select (highlight) "OK to Proceed" by tilting the
joystick and press ENTER.
The system will begin calculating the route.
• For details of the Confirm Destination, see page 31.
24
-EN
Entering a Destination by Latitude and
Longitude
If you know the latitude and longitude of the desired location,
you can display that location by just inputting those numbers.
1
Touch [Latitude/Longitude] on the Find
Destination By screen.
Select (highlight) "Latitude / Longitude" by tilting
the joystick and press ENTER.
The Input Latitude screen is displayed.
2
Input the latitude.
• For details on how to input, see page 11.
The Input Longitude screen is displayed.
3
Input the longitude.
• For details on how to input, see page 11.
The Confirm Destination screen appears.

Publicité

Table des Matières
loading

Table des Matières