Playing Back The Recorded Voice Tag; Searching For A Route Using Voice Tag; Deleting Voice Tag - Alpine NVD-A802 Mode D'emploi

4
Speak into the microphone for 2 seconds to
record a phrase as voice tag.
If a voice tag has been recorded, a voice tag icon is
displayed.
5
To re-record the recording, touch [Re-
Record] and speak by the Record Voice Tag
screen.
To repeat the recording, select [Re-Record] on the
Record Voice Tag screen and press ENTER, then
speak.

Playing Back the Recorded Voice Tag

1
Touch [Playback Recording] on the
Record Voice Tag screen.
Select (highlight)"Playback Recording" by tilting
the joystick and press ENTER.
The recorded voice tag is played back.

Searching for a Route using Voice Tag

You can use a recorded Voice Tag to search for a route.
1
Press the SPEAK button and say "(Go to)
{your recorded Voice Tag}".
The Confirm Destination screen appears.
• If Confirm Address Book is set to "Never" and an
Address Book place is selected, the Confirm
Destination screen is not displayed, but the route is
calculated to the destination (see page 70).
• If Confirm Favorite Dest is set to "Never" and a
Favorite Dest place is selected, the Confirm
Destination screen is not displayed, but the route is
calculated to the destination (see page 70).
2
Press the SPEAK button and say "Yes" or
"OK."
The system will begin calculating the route.

Deleting Voice Tag

1
Touch [Delete] on the Record Voice Tag
screen.
Select (highlight)"Delete" by tilting the joystick
and press ENTER.
The recorded voice tag is deleted.
77
-EN