Satellite Information
The navigation system allows you to view dynamic location
information received from GPS satellites.
This feature is very useful for off-road users in establishing a
starting point before trekking.
1
Touch [Satellite Information] on the
Information menu screen.
Select (highlight) "Satellite Information" by
tilting the joystick and press ENTER.
The Satellite Information screen is displayed.
a
b
a Number of satellites received
Number of satellites received can be up to 12.
b Today's date
c Elevation
Elevation is based on GPS elevation. Car icon moves
as elevation changes.
d Satellites received
Satellites from which you are receiving are displayed
green. Yellow indicates that your position is being
calculated.
58
-EN
Navigation Simulation
You can watch a demonstration of the navigation system's voice
and screen guidance by using this function. The vehicle position
icon will automatically move along the desired route showing a
simulation of how the navigation system functions.
Use this function only while the car is parked.
1
Touch [Navigation Simulation] on the
Information menu screen.
Select (highlight) "Navigation Simulation" by
tilting the joystick and press ENTER.
The Navigation Simulation screen is displayed.
2
Touch [Start], then [
c
Select (highlight) "Start" by tilting the joystick
and press ENTER. Select (highlight) "
d
tilting the joystick and press ENTER.
The drive simulation for the current route begins.
• When the drive simulation is activated, a DEMO icon is
displayed on the lower left side of the screen.
• When the drive simulation is activated, the map scale
and direction can be changed.
• The drive simulation can be activated only when a
destination has already been set.
• If the system detects that the vehicle is moving,
simulation mode will be stopped.
].
" by