Recording Voice Tag - Alpine NVD-A802 Mode D'emploi

About PC cards
• Use the type 1 and type 2 PC card.
• If PC card memory becomes insufficient, data cannot be
written any more. Each voice tag uses approx. 50kb of
memory.
• Be sure to close the PC card slot cover when used the
navigation unit. If dust, etc. enters, a malfunction may
result.
• Do not optimize or compress data on a PC card with a
personal computer.
• The PC card function is not guaranteed. Use the PC
card according to the terms of agreement.
• PC card may not function correctly at high or low
temperature.
• It is recommended to back up important data on a
personal computer.
• For available PC cards, contact your nearest Alpine
dealer, or Alpine at 1-888-NAV-HELP.
L PC Card Standard
Standard Complies to PCMCIA TYPE1 and
TYPE2 (PCMCIA (PC) card slot
complies to regular standard).
Rated Voltage 3.3V or 5V
Maximum Power 0.5A
Output
* To prevent malfunction or damage, note the following
points. Read the PC card Owner's Manual thoroughly.
• Do not insert a PC card other than the above described
into the navigation unit.
• Do not leave the PC card slot cover of the navigation
unit open.
• Do not leave the PC card inserted in the navigation unit
in the car.
• Do not leave the PC card in a car.
• Do not use the PC card outside its working temperature
range.
CAUTION
Alpine accept no responsibility for lost data, etc.,
even if data, etc., is lost while using this product.
76
-EN

Recording Voice Tag

1
Display the Change Entry screen in Address
Book or Change Favorite Destination screen
in Favorites.
• For the Address Book edit screen, refer to "Editing the
Address Book" (page 44).
• For the Favorite edit screen, refer to "Editing the
Favorites" (page 48).
2
Touch [Record Voice Tag].
Select (highlight) "Record Voice Tag" by tilting
the joystick and press ENTER.
The Record Voice Tag screen is displayed.
3
Touch [Start Recording].
Select (highlight)"Start Recording" by tilting the
joystick and press ENTER.