Overheating; Maintenance / Cleaning; Technical Specifications - Vortice PRE-HEATING BOX VORT PROMETEO PLUS HR 400 Notice D'emploi Et D'entretien

ENGLISH
4 4
VORT PROMETEO PLUS HR 400
A
N.B.
Do not use the sockets "A" (fig 4) for connecting
the heater as this might damage the heat recovery
unit circuit board.

Overheating

If the appliance overheats and the safety thermostat
strips, it can be reset manually. Switch off mains
power before removing the cover from the
connections box. This operation must only be
performed by authorised personnel

Maintenance / Cleaning

• This appliance does not require any special
maintenance except periodic checks for correct
functioning.
• Switch off mains power before performing any
maintenance. At least once a year inspect the
heating elements and remove any build-ups of dust
and dirt.
• Do not use solvents, and take care not to damage
delicate electrical components when performing
cleaning.
10

Technical Specifications

(Fig. 5,5a)
MOD
Ø D A B
500 150 150 285
1200 150 150 285
5 5
5a 5a
C
C E F Kg
40 380 250 2,2
40 380 250 2,6
A
D
Ø
E
B
C