Precautions Before Installation - Toto WASHLET Guide D'installation

Do not lift the product by the toilet seat or toilet lid.
y D oing so may result in the product main body dislodging, falling and causing injury.
Do not fold or crush the water supply hose; do not damage by cutting with a sharp object.
y D oing so may result in water leakage.
Do not remove the water filter drain valve while the shutoff valve is open.
y D oing so will result in water leakage.
Install the Washlet properly according to the Installation Guide.
y I mproper installation may result in water leakage, electric shock or fire.
Push the product main body securely onto the base plate.
After pushing the product main body until a click sound is heard, pull it slightly toward you to make sure
that the product does not detach.
y N ot doing so may result in the product main body dislodging, falling and causing injury.
Make sure the plus and minus signs on the batteries are aligned correctly before inserting them.
y O therwise, the batteries may leak fluid, generate heat, rupture, or ignite.
When the product will not be used for a long time, remove the batteries from the remote control.
y F ailure to do so may cause the batteries to leak fluid.
zDo not turn on the electricity and water supply for the product until installation work is complete.
zDo not damage the connection components on the water supply hose (C-2).
zThe water supply pressure ranges from 7.25 PSI (0.05 MPa) <dynamic> - 108.78 PSI (0.75 MPa) <static>.
Use the unit within the said pressure range.
zThe temperature of the water supply should be within a range of 32-95 °F (0 to 35 °C). Make sure the temperature is within this range.
zWorking ambient temperature is within the range of 32-104 °F (0 to 40 °C). Make sure the temperature is within this range.
zDo not use water supply hoses (C-2) and shutoff valve (A-7) other than those supplied with the product.
*Because a water flow test is conducted on each product at the factory, water may remain inside the product. This water does not
indicate a problem with the product.
zThe packing bag on the end of the water supply hose (C-2) is to protect from damage, so do not remove it until step
zPerform wiring correctly according to this product's specifications (rated power 15 A or more, 120 V AC (60 Hz)).
*Power supply, rated power consumption is indicated on the label on the back of this product.
Safety Precautions (Continued)
CAUTION

Precautions before installation

3
- .
10
1