Operation; Mode Of Operation; Maintenance And Environmental Protection; Service Instructions - Meister MFS320-1 Traduction Du Manuel D'utilisation Original

For non-binding recommended settings,
see fig. 4.
8 – Operation
ON/OFF
Insert mains plug into an outlet
• On: Push the switch (1) to the right.
• Off: Push the switch to the left.
9 – Mode of operation
Grinding
Turn on machine.
Move grinding surface over the material
to be ground/sanded with sightly elliptical
movements. Do not apply any additional
pressure, the weight of the machine itself
is sufficient. Conduct a number of grinding
steps with increasingly finer grains.
10 – Maintenance and envi-
ronmental protection
Clean the dust extraction connection
at periodic intervals using a dry brush.
Clean the housing with a damp cloth
only - do not use solvents! Then dry
well.
Remove the dust collection box (4) from
the dust extraction connection to empty
it. Empty carefully, try not to create
dust. Do not breathe in wood dusts!
CAUTION! Electrical and battery
operated units that no longer work
should not be disposed of in the house-
hold waste! They are to be collected
40
separately, in accordance with the
MW-5456230-Bedien-2007.indd 40 MW-5456230-Bedien-2007.indd 40
2012/19/EU directive for the
disposal of electrical and
electronic waste, and sent for
proper and environmental-
ly-friendly recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types complying
with local rules and regulations. For
details, please contact your municipal
authority concerned.
11 – Service instructions
• Store the machine, operating instruc-
tions and where necessary the acces-
sories in the original packaging. In this
way you will always have all the infor-
mation and parts ready to hand.
• Meister devices are to a large extent
maintenancefree, a damp cloth being
sufficient to clean the casing. Do not
drop electrical machines in water.
Please note additional hints given in
the operating instructions.
• Meister devices are subject to stringent
quality control. If however a functional
fault shoult occur, send the device to
our servicing address. The repairs will
be carried out in a short time.
• A brief description of the defect speeds
up the faulttracing and repair time. If
within the guarantee period, please
enclose the guarantee document and
the proof of purchase.
• In so far as a repair under guarantee
is not concerned, we will charge the
repair costs to your account.
04.08.20 08:43 04.08.20 08:43