General Safety Instructions For Handling Power Tools; Instructions - Meister MFS320-1 Traduction Du Manuel D'utilisation Original

Just because you can affix an accessory
to your electrical tool, there is no guar-
antee it is safe to use.
The permitted revolutions of the tool
insert must be at least as high as the
highest value specified on the electrical
tool. Accessories that turn faster than is
permitted may break and fly away.
The external diameter and thickness
of the tool insert must match the dimen-
sions of your electrical tool. Incorrectly
measured tool inserts cannot be proper-
ly protected or checked.
There is a risk of injury. The user of the
device is liable for all property and per-
sonal damages occurring as the result
of incorrect use.
If other components or non-original
components are used with the machine,
the manufacturer guarantee is voided.
Remaining risks:
The operating instructions for this electri-
cal tool contain comprehensive tips for the
safe handling of electrical tools. However,
every electrical tool has a certain level of
remaining risks which cannot be exclud-
ed by the protective mechanisms on the
device. Always operate electrical tools
with the necessary care.
Remaining risks may be, for example:
• Touching rotating parts or tools.
• Injury caused by flying tools or tool
parts.
• Risk of fire with insufficient ventilation
of the motor.
• Adverse effects on the hearing caused
by working without ear defenders.
MW-5456230-Bedien-2007.indd 35 MW-5456230-Bedien-2007.indd 35
The ability to work safely is dependant
on the familiarity of the operator when
it comes to handling the given electri-
cal tool. Appropriate knowledge of the
machinery and careful behaviour when
working help to minimise the remaining
risks.
5 – General safety instruc-
tions for handling power
tools
WARNING! Read all safety warn-
ings and all instructions. Failure
to follow the warnings and instructions
may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains operated (corded)
power tool or battery-operated (cord-
less) power tool.
1 Work area
a Keep work area clean and well lit.
Cluttered and dark areas invite acci-
dents.
b Do not operate power tools in explo-
sive atmospheres, such as in the
presence of flammable liquids, gases
or dust. Power tools create sparks
which may ignite the dust or fumes.
c Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
2 Electrical Safety
a Power tool plugs must match the
outlet. Never modify the plug in any
35
04.08.20 08:43 04.08.20 08:43