Meister MFS320-1 Traduction Du Manuel D'utilisation Original page 37

4 Power tool use and care
a Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
b Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be con-
trolled with the switch is dangerous
and must be repaired.
c Disconnect the plug from the
power source before making any
adjustments, changing accessories,
or storing power tools. Such preventive
safety measures reduce the risk of start-
ing the power tool accidentally.
d Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are dan-
gerous in the hands of untrained users.
e Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
MW-5456230-Bedien-2007.indd 37 MW-5456230-Bedien-2007.indd 37
from those intended could result in a
hazardous situation.
h Keep handles and grips dry, clean,
and free from oil and grease.
Slippery handles and grips do not
enable safe handling and control of
the power tool in the event of unex-
pected situations.
5 Service
a Have your power tool serviced
by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
Additional safety notes for grinders
and polishers
• Wear a dust-protection mask. Breathing
in dust represents a risk to the operator
and anybody else in the vicinity.
• Wear suitable personal protective
gear. Touching or skin contact with
dust represents a risk to the operator
and anybody else in the vicinity.
Note: When sanding, for example, paint
containing lead, as well as certain types
of wood and metal, it is possible that
poisonous dust may be generated. Take
appropriate precautions to prevent opera-
tors and anyone else in the area breathing
in dust/coming into contact with dust.
• Use the additional handle supplied
with the unit. Loss of control of the
unit may lead to injuries
• Hold the tool by the insulated handle
surfaces when carrying out tasks
during which it is possible that the
tools will come across hidden power
cables or its own cable. Contact with
a power-carrying cable can also put
37
04.08.20 08:43 04.08.20 08:43