Operation - Mobicool S15 Notice D'emploi

_S15_U15.book Seite 9 Freitag, 20. Februar 2009 5:13 17
S15 DC, S15 DC/AC, U15 DC
5

Operation

Note
I
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the "Cleaning and maintenance"
chapter on page 10).
5.1 Energy saving tips
Choose a well ventilated installation location which is protected against di-
rect sunlight.
Allow warm food to cool down first before placing it in the device to keep
cool.
Do not open the cooling device more often than necessary.
Do not leave the lid or door open for longer than necessary.
5.2 Using the cooler
Caution!
a
The lid of the cool box must always be secured with the lock when
loading and unloading (fig. 2, page 3). If the lid is fully open with-
out being secured, the box could tip over.
Note
I
Like every cooling device, your cooler must be properly ventilated
so that any heat created can dissipate. Otherwise proper function-
ing cannot be ensured.
➤ Place the cooler on a firm base.
➤ Connect the 12 V connection cable to the cigarette lighter or a 12 V plug
socket in the vehicle.
or ...
➤ S15 DC/AC only: connect the 12 V connection cable to the rectifier
(fig. 3, page 3) and plug rectifier into a 100 – 240 V AC socket.
Note
I
Close the box tightly by pushing down the lid.
Operation
9