Receptacle Wiring Diagram; Battery Holder Installation - Napoleon Fireplaces LHD62N Instructions D'installation Et D'opération

7.2

RECEPTACLE WIRING DIAGRAM

PRE-FINISHING
ACCESS PANEL
ELECTRICAL COVER
7.3

BATTERY HOLDER INSTALLATION

The battery holder must be
A.
located within 8 feet of this side
of the appliance and must be
accessible for programming the
remote.
Install 4 AA batteries, ensure
B.
that the positive and negative
ends correspond with those
identifi ed in the battery holder.
Install the battery holder into
C.
a standard electrical switch
box. Determine an appropriate
location and install the electrical
box.
NOTE: Ensure the 3 position slider
switch is in the "REMOTE" position
(middle).
RESET/PROGRAM BUTTON (PRG)
L1
PLASTIC BUSHING
L2
CABLE CONNECTOR
37
EN
W415-1334 / 06.10.14