Wiring Diagram; Receptacle Wiring Diagram; Electronic Wiring Diagram; Wiring Requirements - Napoleon Fireplaces BL36NTE Instructions D'installation Et D'opération

7.0 WIRING DIAGRAM

7.1

RECEPTACLE WIRING DIAGRAM

L1 (BLACK)
CABLE
CONNECTOR
7.2

ELECTRONIC WIRING DIAGRAM

DO NOT USE THIS APPLIANCE IF ANY PART HAS BEEN UNDER WATER. CALL A QUALIFIED
SERVICE TECHNICIAN IMMEDIATELY TO HAVE THE APPLIANCE INSPECTED FOR DAMAGE TO THE
RISK OF ELECTRICAL SHOCK OR EXPLOSION. DO NOT WIRE 110V TO THE VALVE OR TO THE
APPLIANCE WALL SWITCH. INCORRECT WIRING WILL DAMAGE CONTROLS.
ALL WIRING SHOULD BE DONE BY A QUALIFIED ELECTRICIAN AND SHALL BE IN COMPLIANCE
WITH LOCAL CODES. IN THE ABSENCE OF LOCAL CODES, USE THE CURRENT CSA22.1 CANADIAN
ELECTRIC CODE IN CANADA OR THE CURRENT NATIONAL ELECTRIC CODE ANSI/NFPA NO. 70 IN
ALWAYS LIGHT THE PILOT WHETHER FOR THE FIRST TIME OR IF THE GAS SUPPLY HAS RUN OUT,

7.2.1 WIRING REQUIREMENTS

It is necessary to hard wire this appliance.
Permanently framing the appliance with an enclosure, requires the appliance junction box to be hard wired.
This appliance must be electrically connected and grounded in accordance with local codes. In the absence
of local codes, use the current CSA C22.1 Canadian electrical code in Canada or the ANSI/NFPA 70-1996
national electrical code in the United States.
ELECTRICAL
BOX COVER
SCREW
GROUND
L2
(GREEN)
(WHITE)
!
ELECTRICAL CIRCUIT.
THE UNITED STATES.
WITH THE GLASS DOOR OPENED OR REMOVED.
3 PRONG
RECEPTACLE
(BLACK)
(WHITE)
WIRE
GROUND
NUTS
(GREEN)
WARNING
41
ELECTRICAL
BOX
69.2_2
W415-1442 / D / 12.01.16
EN