Napoleon Fireplaces LHD62N Instructions D'installation Et D'opération page 27

27
* When constructing the enclosure allow for fi nishing material thickness to maintain clearances.
IMPORTANT: Before fi nishing in the appliance test the operation using the remote control, cycling it
through all of its different modes, see "OPERATION" section. Should trouble shooting be required,
EN
access to the controls can be made through the pre-fi nishing access panel.
96"
(2438mm)
MINIMUM
77"
(1956mm)
81"
(2057mm)
This appliance is
supplied with two stand-offs.
For convenience the stand-offs
have been shipped fl at and located
27"
on the back of the appliance. Before framing
(686mm)*
ensure the stand-offs are bent up and screwed into
place ensuring a height of 3" (76mm).
STAND-OFFS
Bend and secure the stand-offs as
illustrated :
A
B C
W415-1334 / 06.10.14