Operation; Operate The Printer In A Wireless Network; Introduction; Sd Card - Seca 465 Mode D'emploi Et Garantie

5. OPERATION

5.1 Operate the printer in a wireless network

Introduction

Integrate the printer in a
wireless network
This device is equipped with a wireless module. The
wireless module allows measurement results
determined using seca 360° wireless weighing and
height measuring devices to be received wirelessly.
Details on setting up a seca 360° wireless network
can be found in the instruction manuals for scales and
height measuring systems.

SD card

An SD card reader is integrated in the wireless module
of the printer. The SD card supplied with the printer is
already inserted in the SD card reader at the factory.
The SD card contains factory settings for printing out
measurement results and evaluations (see "Restore
factory settings (reset)" on page 67). The printer is pre-
configured to be operational.
seca Print Designer Software is likewise on the SD
card. This software allows measurement results to be
printed out adapted to suit local regulations and your
own requirements (see "Use configuration program" on
page 59).
SD card
While setting up a wireless network (see the instruction
manual for the seca 360° wireless measuring device
in use) you will be asked to switch on all the seca 360°
wireless components for integration in a wireless
group.
ATTENTION!
Loss of wireless connection to other
components
If the components of an existing wireless group
stay switched off during the integration process,
their wireless connection to the seca 360°
wireless measuring device will be lost.
− If a wireless group already exists, ensure that
both the printer and all the components in the
existing wireless group are switched on
during the integration process.
English
Operation • 57