Programming The Cooking; Delaying The Cooking - Atag MC3211C Mode D'emploi

programming the cooking

Select the cooking mode you require and adjust the temperature if needs be.
E.g.: Fan oven position
Press the cooking time button
The cooking time reads 0:00 and it flashes together with the
bol to show that the cooking time can be reset.
Set the cooking time to the length you require with the + or -
controls. E.g. 25 min. cooking.
The new time is memorized automatically after a few seconds or it can be
confirmed by pressing the
The readout then gives normal time and the bole
flashing. The oven will now start heating.
When cooking is finished, the oven will give out a series of bleeps for
several minutes and the
You can stop the bleeps by pressing the START/STOP control for a
second.
Cooking times can be checked or changed whenever you wish,
simply by pressing the
You can cancel your programme by pressing the START/STOP control..
This can only be done in the
Follow the same procedures as for programming your cooking.
Then, when you have set the cooking time,
Press the "End of cooking" control
time will appear on the readout and flash with the
that the end of cooking time can be reset.
E.g.: It is 12.30 p.m.
You have set 30 minutes of cooking time. The end of cooking time reads
13.00.
Reset the end of cooking time with the
E.g.: End of cooking 14.00
Once the end of cooking time has been re-programmed, normal time re-
appears on the display.
The oven will now start heating at the appropriate time to finish cooking at
14.00.
When cooking is finished, the oven will give out a series of bleeps for several
minutes and the symbol will flash. You can
stop the bleeps by pressing the START/STOP control for a second.
NOTE : Cooking times can be checked or changed whenever you wish, sim-
.
ply by pressing the
You can cancel your programme by pressing the
START/STOP control.
how to use your oven
temperature at 200°C.
control.
symbol will flash.
control.
how to use your oven

delaying the cooking

, the "end of cooking"
symbol to show
+ -
or control.
sym-
symbol stops
cooking modes.
GB 13