Using The Timer; Using The Child Safety Feature - Atag MC3211C Mode D'emploi

how to use your oven

using the timer

how to use your oven

using the child safety feature

GB 14
Your oven is fitted with an electronic timer for your use other than in
conjunction with the oven.
ATTENTION: This program is separate from the oven. It cannot be used
to stop automatic cooking. This program may never-theless
be used even when the oven is in use. In this case, the timer display
takes priority over the clock display.
Press the timer touch
bol appears and flashes.
Press the
required (up to 59 minutes and 59 seconds).
The display stops flashing after a few seconds and the timer starts, counting
down the time in seconds. When the time is up, the timer bleeps to warn you
and the
Stop the bleeping by pressing the
Normal time is now displayed.
NOTE: You may change the remaining time at any point by pressing the
touch control and using the
cancel the timer program, set the time at
In order to prevent your oven being turned on unintentionally, you may
lock the controls.
To do this:
- Press on the START/STOP touch control until it bleeps.
Keep pressing on the touch control until the bleep stops and a key
appears
NOTE: Only the "separate timer" program remains operational.
(key)
-To unlock the controls, repeat the operation.
-Press the START/STOP touch control until you hear a long bleep.
Keep your finger on the touch control until the bleep stops and
the
.
The display flashes and the timer sym-
+ -
or touch controls to obtain the length of time
symbol flashes.
+
-
or
touch controls. To
on the indicator panel.
key disappears from the display panel.
touch control or START/STOP.
0.00
and press START/STOP .