Programming The Cooking - Atag OX6011K Mode D'emploi

ECO
0
ECO ECO
Température Minuteur
Durée / Fin de Cuisson
ET
Temps
ECO
SET

programming the cooking

- Select the cooking mode you require and adjust the temperature
if needs be.
example: natural convection position
temperature 200°C.
- Press SET until the
The time and blinks on the display panel. You can now alter it.
Press + or - to set the time chosen.
e.g. 25 minutes cooking time
The oven assumes the time is correct a few seconds after you stop turning the
knob -> The display stops blinking.
The count-down starts as soon as you stop pressing the + and - buttons.
After these actions, the oven heats up:
When the cooking time is over (the pre-programmed time ends)
- The oven switches off,
- The cooking time symbol goes out,
- The display shows 0:00
- The oven gives a series of bleeps for several minutes.
To stop the bleeper, press any button on the oven front. The time is
displayed again.
how to use your oven
symbol blinks (length of cooking time).
GB 57