Programmed Cooking - Atag MA4570G Mode D'emploi

USING YOUR APPLIANCE

Programmed cooking

Note:
If the setting is not confirmed, the adjustment will automatically be
saved in the appliance's after a few seconds.
Immediate cooking
The programmer should only display the time. It should not be flashing.
Use the knob to select the required cooking setting.
Example: microwave Power setting 1000 W.
• Confirm by pressing the knob once.
The cooking time flashes in the display.
• Set the cooking time, using the knob.
Example: 1 min 30s
• Confirm by pressing the knob.
Cooking starts.
The power or temperature setting may be changed.
• Press the power setting touch button until the display flashes and
then release it. When the (1000 W) power setting flashes you may
adjust it.
• Set the power, using the knob.
Example: 800 W
• Confirm by pressing the knob.
• To stop cooking, press the 'STOP' button for a few seconds.
Cooking with immediate start and a set cooking time
Select the desired cooking mode and adjust the power (see paragraph:
"Immediate cooking").
• Press the time button.
The display flashes several times to indicate that a setting may be
entered.
• Using the knob, set the cooking time.
Example: 2 minutes.
• Press the knob to confirm.
EN 9