Notes On Trouble Shooting - Rehau RAUTOOL H2 Mode D'emploi

rautool h2

notes on trouble shooting

Fault
Clamping cylinder plunger shows no or only
delayed movement after actuating pump .
Tool unable to push compression sleeve
up to fitting .
If the faults cannot be remedied, return tool to REHAU's service center or to your dealer .
Remedy
- Check hydraulic hose for leakage (not under
pressure), and have it changed if necessary.
- Check foot pump and clamping tool for leakage (not under pressure);
if necessary, have tool serviced at REHAU's service center.
- Vent tool
- Check hydraulic hose for leakage (not under pressure),
and have it changed if necessary.
- Check foot pump and clamping tool for leakage (not under pressure);
if necessary, have tool serviced at REHAU's service center.
- Vent tool
33