Setting The End Stops - Chamberlain WPD45UP-05 Notice De Montage Et De Commande

Setting end stops
Commissioning
Now turn the power back on.
Setting end stops
To ensure that your roller shutter stops
at the right place at top and bottom, you
must fi rst set the end stops.
Important
Be sure to set both end stops, otherwise
it may cause a malfunction.
12
Setting the top end stop
Press and hold Set button
1.
For this purpose, use a small pin or so-
mething similar, because the Set button
is lightly recessed into the cover.
Press the UP button briefl y
2.
The roller shutter moves up.
Release the Set button immediate-
3.
ly if ...
... the shutter has reached the desired
position for the top end stop. The motor
stops, the top end stop is now saved.