Chamberlain WPD45UP-05 Notice De Montage Et De Commande page 35

Setting end stops
Set the bottom end stop
Press and hold Set button
1.
For this purpose, use a small pin or so-
mething similar, because the Set button
is slightly recessed into the cover.
Press the DOWN button
2.
The roller shutter moves down.
Release the Set button immediate-
3.
ly if ...
... the shutter has reached the desired
position for the bottom end stop. The
motor stops, the bottom end stop is
now saved.
Changing end stops
Move the roller shutter into the centre
position and reset the respective end stop
as described here.
13