Delete Data (Reset); Roller Shutter Drive - Chamberlain WPD45UP-05 Notice De Montage Et De Commande

Delete data (reset)

Press the Reset button to clear all selected
end stops and times.
Note
You must keep the button pressed for
approx 2 seconds. The indicator light
fl ashes briefl y as acknowledgement.
Then start again with the setting of the
roller shutter drive (see page 12).
18
Delete data (reset)
1. Press RESET button
For this purpose, use a small pin or so-
mething similar, because the Set button
is slightly recessed into the cover.