Manual Mode - Chamberlain WPD45UP-05 Notice De Montage Et De Commande

Manual mode/Operating the roller shutter drive
There are two ways to use
the drive:

1. Manual mode

You can raise or lower your roller
shutter with the two control keys UP
and DOWN. On pressing one of the two
control buttons, the shutter moves to
the top or bottom end stop.
2. Automatic mode
In automatic mode, you can set and
save an opening time and a closing
time for your roller shutter. The corre-
sponding control commands (UP or
DOWN) are then repeated in a 24-hour
cycle.
Additionally, you can continue to
control the roller shutter drive manually
with the two control buttons.
14
If the end stops are set, you
can operate your roller shutter
drive at any time using the UP
or DOWN button.
Raise roller shutter
Press the UP button
The roller shutter moves up to
the top end stop.
Lower roller shutter
Press the DOWN button
The roller shutter moves
down to the bottom end
Stop roller shutter
Press the UP button
or
Press the DOWN button
You can stop the roller
shutter by pressing the UP
or DOWN button any time.