Puky CAT 1 Mode D'emploi page 9

The rear section to be mounted during the first
assembly has not been designed for regular
disassembly. During the assembly, please
make sure that screws and nuts do not get into
the hands of children as they can be swal
lowed easily.
6. Care and maintenance
cleaning, which may not be aggressive or
caustic. The vehicle is to be protected from
damp areas (e.g. a garage) are to be avoided.
Attention! Don't use a high pressure cleaning
machine for cleaning the vehicle.
Check all parts regularly for possible wear and
tear (or more often if use is frequent) and that
all screw connections and protective equip
ment (e.g. protective and brake caps) are
secure. To maintain the high level of safety
required of the design, worn parts must be
replaced immediately. Genuine spares are
Wear-and-tear-parts: tyres, handlebar grip,
For vehicles with pneumatic tyres, the maxi
mum air pressure is 2.5 bar. The air pressure
vehicle loses lateral stability and there is
increased danger of it falling over! Lower air
pressure increases wear and makes riding the
tricycle more difficult.
User Manual
Warning!
Valve caps need to befirmly tightened and kept
away from childrens' reach (danger of swallow
up).
Warning!
As on car tyres, with vulcanised natural rubber
there is a risk of stain formation around the
wheels' contact surface. Please protect the
contact surface between ground and tyres.
The legal warranty rules apply. Damages
occuring from unappropriate use, violence,
are excluded from any warranty claims.
8. Operating guide
Automatic freewheeling ensures safe pushing
during which the child's feet can rest on the
pedals. If automatic freewheeling interferes
with learning to ride the tricycle, the hub can
be locked with a small handle, so ensuring
normal rigid drive of the tricycle (not applicable
for all types).
9
GB