Eu Declaration Of Conformity (Extract); Independent Secondary Brake For Transport Of Persons - Greifzug blocstop BSO Série Manuel D'installation

Installation and operating manual
19

EU Declaration of Conformity (Extract)

19.1 Independent secondary brake for transport of persons

that the machine described complies with technological safety standards that were applicable to the equipment in the EUROPEAN
The above-mentioned machine matches the model specified on the prototype testing certificate, approved by the following certificate
Commissioning the machine is prohibited until the machine in which this is installed complies as a whole with the regulations of the
2006/42/EC Directive, the corresponding national legislation for implementing the regulations in accordance with national law and the
The valid EN 1808 standard must be applied for the PAM in which the machine is installed.
EN-18
The manufacturer hereby declares
Greifzug Hebezeugbau GmbH
Scheidtbachstraße 19–21 51469 Bergisch Gladbach
represented by
Dr. Ing. Uwe Schuht
Managing Director
DECLARATION OF CONFORMITY
UNION when it was launched on the market by the manufacturer.
APPLICABLE DIRECTIVES AND STANDARDS:
2006/42/EC;
EN 1808; EN ISO 12100-1; EN ISO 12100-2; EN ISO 14121-1
DESIGNATION
Independent secondary brake
APPLICATION
Transport of persons
MODEL
BSO 500, BSO 520, BSO 1000, BSO 1020, BSO 1030, BSO 1040
SERIAL NUMBER
Year of manufacture
from 01.2010
numbers
corresponding declaration of conformity has been issued.
Issuer of the prototype testing certificate:
Fachausschuss MHHW
Test and certification centre BG-PRÜFZERT
Graf-Recke-Straße 69
40239 Düsseldorf
notified as No. 0393 at the European Union Commission
Responsible for the documentation:
Dr. Ing. Uwe Schuht, Tel.: +49 (0) 2202 1004 63
Bergisch Gladbach, date
08 040
G905.5 - 02/2011