Preventing Unnecessary Recording (Vas) - Panasonic RR-XS350 Mode D'emploi

Preventing unnecessary recording (VAS)

When VAS (Voice Activated System) is set, if silence continues for approx. 2 seconds during microphone
recording, the recording is paused automatically. If the unit detects sound, the recording resumes.
• When the unit is not in the stop state, press
1
2
3
To exit the setting screen, press
[STOP g/RETURN].
To start VAS recording, press [REC *].
●
●
●
18
18
[STOP g/RETURN].
Press [MENU].
Press u, i to select "VAS" and
press [q OK] to enter.
Press +, – to select "On" and press
[q OK] to enter.
(The factory setting is "OFF".)
"VAS" is displayed.
For important recording, set the VAS setting to OFF.
If the LOW CUT FILTER setting is ON, low frequency sound may be cut out and VAS recording
may not activate. In this case, change the LOW CUT FILTER setting to OFF. (➜ page 17)
If the recording is paused with no sound state, "VAS", recording indicator, and "*" blink. When
[REC *] is pressed from this recording pause state, the status is changed to normal recording
pause state and "VAS" lights up.
Adjusting the VAS operation level:
Press u, i during VAS recording.
(The factory setting is "
● You can adjust the sound detection level from
1 to 5.
● If the audio to record is low, increase the VAS
value (sensitivity level). If the sound is loud,
decrease the VAS value.
".)