Setting The Clock - Panasonic RR-XS350 Mode D'emploi

Setting the clock

The clock is used as a file name ( ➜ page 38) or to preserve recording date and time information.
Set the correct date and time. The date and time need to be set after the battery is replaced.
• Turn the power on. ( ➜ page 8)
• After turning the power on for the first time
after purchase or replacing the battery,
proceed to step
Press [MENU].
1
Press u, i to select "DATE" and
2
press [q OK] to enter.
Press +, – to set
3
"
press i.
• Set the last two digits of the year.
("12" in the case of 2012)
Press +, – to set "
4
press i.
● The clock operates with the monthly loss/gain of approx. 60 seconds at normal temperature.
● The clock setting will be lost if the battery is removed or completely exhausted.
.
3
" (year) and
" (month) and
5
Press +, – to set "
press i.
• To return to the previous setting item,
press u.
Press +, – to select the time display
6
format and press i.
Select " " for 24-hour display, and "
12-hour display.
• The display format that is blinking is
currently selected.
Press +, – to set the hour and press
7
i.
Press +, – to set the minute.
8
To change the setting, press u, i to
move between the items, and then press
+, – again to make the setting.
Press [q OK] to enter.
9
• The date and time are set and the clock
starts to operate.
To exit the setting screen, press
[STOP g/RETURN].
" (day) and
" for
9
9