Migatronic TIG SCOUT 160 HP Manuel D'instructions page 14

MAINTENANCE
The machine requires periodical maintenance and
cleaning in order
cancellation of the guarantee.
WARNING !
Only trained and qualified staff members can
carry out maintenance and cleaning. The
machine must be disconnected from the mains
supply (pull out the mains plug!). Thereafter, wait
around 5 minutes before maintenance and
repairing, as all capacitors need to be dis-
charged due to risk of shock.
Power source
- Clean the fan blades and the components in the
cooling pipe with clean, dry, compressed air as
required.
- A trained and qualified staff member must carry
out inspection and cleaning at least once a year.
to avoid malfunction
All MIGATRONIC machines carry a twelve month
and guarantee against hidden defects. Such defects
must be notified no later than two months after it
has been noticed. The warranty runs for twelve
months after invoicing to end customer.
The warranty becomes void by faults that can be
attributed to incorrect installation, pests, transport
damages, water- and fire damages, strokes of
lightning, use in connection with a synchronous
generator and use under abnormal conditions,
which lies beyond the product specification.
Lack of maintenance
There is a lapse of warranty if the product is not
properly maintained. E.g. if the product is dirty to
such a degree that cooling is hindered. The
warranty does not cover damages, which can be
traced back to unauthorised and incorrect repairs of
the product.
Wear parts
The warranty does not cover wear parts (welding
hoses, welding cables and wire drive rolls)
Resulting damages
Use of the product must stop immediately after
acknowledgement of a defect in order to avoid
further damage of the product. The warranty does
not cover resulting damages due to use of the
product after acknowledgement of a defect. More-
over, the warranty does not cover resulting
damages on other items due to product defect.
14
WARRANTY