Setting Up Your Oven; Turntable Installation; Installation - Rotel U1574CH Mode D'emploi

Masquer les pouces Voir aussi pour U1574CH:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

 SETTING UP YOUR OVEN
o
Remove the oven and all materials from the box and oven cavity.
o
Your oven comes with the following accessories:
 Glass tray
 Turntable ring assembly
 Instruction Manual
 Grill rack
 TURNTABLE INSTALLATION
o
Never place the glass tray upside down. The
glass tray should never be restricted.
o
Both glass tray and turntable ring assembly
must always be used during cooking.
o
All food and food containers must always be
placed on the glass tray for cooking.
o
If the glass tray or turntable ring assembly
cracks or breaks, contact your nearest author-
ised service centre.
 INSTALLATION
o
Select a level surface that provides enough open space for the inlet and/or outlet
vents.
 The minimum installation height is
85 cm.
 The rear surface of the appliance
must be placed against a wall. Leave a
minimum clearance of 30 cm above
the oven; a minimum clearance of
20 cm is required between the oven
and any adjacent walls.
 Do not remove the legs from the bottom of the oven.
 Blocking the inlet and/or outlet openings can damage the oven.
 Place the oven as far away as possible from radios and TVs. Operation of the mi-
crowave oven may cause interference to your radio or TV reception.
o
Plug your oven into a standard household socket. Be sure the voltage and the fre-
quency is the same as the voltage and the frequency on the rating label.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
1
1
1
1
Hub (underside)
Glass tray
Turntable shaft
51
Turntable ring assembly

Publicité

Table des Matières
loading

Table des Matières