Nameplate; Technical Specifications - Quickie Xenon2 FF Notice D'utilisation

12.0 Nameplate

The nameplate is located on either the cross-tube assem-
bly or the transverse frame tube, as well as on a label in
the owner's manual. The nameplate indicates the exact
model designation and other technical specifications.
Please provide the following pieces of information when-
ever you have to order replacement parts or to file a
claim:
• Serial number
• Order number
• Month/Year
SAMPLE
RubiX
Argon2 2
Xenon2 FF
XXXX.XX.XX
mm mm
Max.XX°
XXX XXX
Xenon2 FF
Product Name/SKU Number.
Maximum safe slope with anti-tip tubes
fitted, Depends on wheelchair setting,
posture and physical capabilities of the
user.
Seat width.
Depth (maximum).
Load Maximum.
CE Mark
User's Guide.
Crash Tested
Not Crash Tested
Date of manufacture.
XXXX.XX.XX
Serial number.
XENON 2 FF
Xenon2 XXXXXX
kg
XXX

13.0 Technical Specifications

Overall width:
With standard wheels including hand rims, close mount;
• in combination with aluminium side guard:
SW + 170 mm
• in combination with plastic clothes protector:
SW + 190 mm
• With extra-narrow hand rim fitting, overall width is
reduced by 20 mm.
• With standard wheels including hand rims and 4° cam-
ber: SW + 250 mm
Overall length:
910 mm with SD 480 mm
Overall height:
1120 mm with BH 450 mm
Weight in kg:
• Overall from 8.8 kg
• Transportation (without footrest, wheels, side guard),
6.3 kg
• Side guard (unit) 1.3 kg
• Wheels (unit) 2.2 kg
Maximum weight limit:
Xenon up to a load of 110 kg or 140kg, depending on
frame version.
Seat heights:
The choice of frames, forks and castors as well as the
size of the rear wheel (610mm (24")), (635mm (25"));
determines what seat heights are possible.
The wheelchair conforms to the following standards:
1. Requirements and test methods for static, impact and
fatigue strengths (ISO 7176-8)
2. Flammability resistance of upholstered parts in accord-
ance with ISO 7176-16 (EN 1021-1/2)
35 Rev.4.0