Adjusting The Temperature; Cleaning And Care - Rotel U7312CH Mode D'emploi


Level III = both switches "I" and "II" on, full power (1500W / 2000W)
o
The respective indicator lights will light up.
 ADJUSTING THE TEMPERATURE
o
As soon as the temperature set on the unit has been reached in the room, turn the
thermostat knob (2) slowly to the left until the indicator light goes out. The
thermostat will now automatically control and maintain the prevailing temperature
of the room.
 FAN
o
The fan is connected to an additional heater that has an output of 380W. This can
be switched to using switch (5).
o
In the Timer mode, this heater and fan are also switched off in the corresponding
phase.
 CLEANING AND CARE
o
The unit does not require any special care. It is sufficient to wipe any dirty areas
with a soft cloth when the unit is cold. Do not use any sharp or abrasive cleaning
agents and solvents.
 DISPOSAL
o
For proper disposal, the unit is to return to the dealer, the service agent or the
company Rotel AG.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use