Control Via Tablet Computer/Smartphone - Monacor AKB-30DT/DSP Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9 Control via Tablet Computer/Smartphone

In the "App Store" of Apple Inc ., variants of the DSP control program
are available under the name "DSP-CONTROL" .
The DSP control on a tablet computer is similar to that described
in the previous chapters . Control via iPhone, however, is limited to
creation and operation of groups of units of the type "Master Volume"
(
 chapter 7 .3 .4) .
Important: Only a single DSP program can be active at a time .
Simultaneous DSP control from multiple locations is not possible, even
if different units are to be controlled within a network .
The overview of units slightly differs from the view described in chap-
ters 7 .2 and 7 .2 .1 . Figure 13 shows the overview of units on an iPhone;
figure 14 shows the overview on an iPad with the following display
and control elements:
[33] General settings
[34] Create a new group
[35] Group name
[36] Delete a group
[37] Configure a group
e . g . add or remove members
[38] Open a window for group control (
[39] Name of the unit
[40] Connection status of the unit
[41] Level indications of the unit
58
 chapter 7 .3 .4)
[35]
[36]
[39]
Fig. 13 Overview of units on an iPhone
[33]
[34]
[37]
[38]
[40]
[41]

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

17.6770

Table des Matières