Group Control - Monacor AKB-30DT/DSP Mode D'emploi

7.3.4 Group control

As described in chapter 7 .2 .1, it is possible to create groups of units
to be controlled together . Use the button
overview (fig . 7) to call up the configuration window .
For controlling groups of units of the type "Carbon Copy" and
"Advanced", the same configuration windows like for configuring the
individual units are used (
the settings of the individual group which parameters can be changed
in the configuration windows for the group (
When a group of the type "Master Volume" is called up, the
window shown in figure 11 will appear .
52
behind the group in the
☞
chapters 7 .3 .2 and 7 .3 .3) . It depends on
☞
chapter 7 .2 .1) .
[27]
[28]
[29]
[30]
[31]
Fig. 11 Group control "Master Volume"
[26]
[32]