Disposal; Accessories, Spare Parts; Repair; Service, Calibration And Function Check - power2max Type S Guide De L'utilisateur

10 Disposal

The symbol of the crossed-out wheeled bin found on the documentation and the packaging
material of this product means that, in the European Union, electrical and electronic
products, batteries and accumulators must be disposed of in a separate waste collection
container.
Please dispose of these products separately from all other waste material, in order to avoid
damage to the environment and to human health, caused by uncontrolled waste disposal and to promote
sustainable recycling of material resources. Please do not dispose of these products in general domestic
waste.

11 Accessories, Spare Parts

If required, you can order the following
CR2450 battery
O-ring for the battery compartment;
Battery cover including screws; and
Coloured ring in the different colours (power2max green, white, red, blue, black).
Further components such as cranksets, are also available in the web shop. Further details can be
found online.

12 Repair

Repair of the power2max
ve spare parts.

13 Service, Calibration and Function Check

The power2max powermeter is always delivered with a factory calibration that does not need to be
renewed during the warranty period.
You have nonetheless the possibility to order a calibration or function check through our web shop.
In such case your power2max
proper functioning. Together with your
acceptance certificate.
IMPORTANT: An order for calibration and function check may be useful after an accident,
for example. This will not extend the warranty period; potential liability for any mechanical
damage not found is expressly excluded.
42
power2max
powermeter is generally not possible. It is only possible to change defecti-
powermeter will be inspected externally, recalibrated and checked for
power2max
accessories and spare parts in the web shop:
powermeter, you will receive a renewed test and