power2max Type S Guide De L'utilisateur page 36

6. Now insert the crank into the
powermeter. Ensure the crank arm is
positioned and seated correctly.
For models with lock rings (e.g., Cannondale
Hollowgram, Rotor 3D24, Rotor 3D30 / 3D+,
Specialized S-Works and FACT):
Put a few drops of medium thread-locking
adhesive (e.g., Loctite 243) on the inside of the
lock ring and tighten the lock ring using the
specific tool.
IMPORTANT: Ensure that the lock ring is
properly seated on the threads.
T ighten the specific tool in a bench vise. This
ensures the specific tool is properly seated
and provides a stable work base.
power2max
35