Tighten the lock ring to the manufacturer
specified torque. You find the torque
specification on the calibration certificate or
can find get it directly from the manufacturer
of the crankset.
Models with mounting bolts (e.g., FSA
Gossamer and K-Force Light Megaexo, SRAM
Force22, SRAM S900):
If required, put a drop of medium thread-
locking adhesive (e.g., Loctite 243) on the
mounting bolts. If the mounting bolts are
already coated with thread-locking adhesive
this is not required.
Tighten
the
manufacturer-specified installation torque.
You find the installation torque on the
calibration certificate.
7. Mount
the
complete
bike. Follow the manufacturer installation
instructions. If required, these can be found
on the power2max website or on the site
of the manufacturer. Check the functioning
of the front derailleur after installation and
adjust as required.
IMPORTANT: follow manufacturer instal-
lation instructions.
36
mountain
bolts
to
crankset
on
the
the