using the in-built temperature sensor. Using these two mechanisms your
meter ensures your power is measured accurately and precisely at all times.
IMPORTANT: the automatic zero function is deactivated on
built for track use. Here a manual zero should be established at regular intervals.
8.4
Battery life
Normal battery life is approximately 400 hours. Battery life can be reduced if you use your
power2max
8.5
After a ride
Your
power2max
riding. This reduces power consumption and increases battery life.
NOTE: The movements that occur during transport may activate your
meter. To prolong battery life you can remove the battery when transporting the bike over
a longer distance.
8.6
Following an accident
power2max
The
crash are generally absorbed by the crank arms and bottom bracket. It is very unlikely that your
power2max
In the interest of safety you should check the following after a crash:
Are the crank arms damaged? Crank arms can have hairline cracks that are not immediately
visible and that could lead to sudden failure. It is therefore advisable to replace crank arms
after a crash.
Rattling noise in the area of the cranks may indicate damage to the
powermeter. Check all mechanical connections.
9 Service and Maintenance
The cover of the battery compartment should only be removed when changing batteries. The O-ring
should be checked and changed if it shows any signs of wear or damage.
Do not use paint thinners or solvents when cleaning your
water and soap and a soft sponge or cloth. Using paint thinners or solvents voids the warranty.
IMPORTANT: Never use high pressure cleaning equipment to clean your
powermeter in cold conditions.
powermeter enters a standby mode approximately 2 minutes after you stop
powermeter is designed to be a highly reliable product. Impact forces from a
powermeter gets damaged in a crash.
power2max
power2max
power2max
power2max
power2max
powermeter. Instead, use
power2max
power-
powermeters
power-
powermeter.
41