power2max Type S Guide De L'utilisateur page 35

3. First attach the chain rings to the
powermeter. Make sure the chain rings are
positioned correctly
manufacturer specifications.
Place the large chain ring on the outer side of the
power meter as shown on the right. Ensure that
chain rings are correctly aligned: the chain catcher
pin should align with the crank arm.
4. Align the holes for the chain ring bolts.
5. Having placed the small chain ring against the
back of the power meter, insert and tighten the
chain ring bolts.
IMPORTANT:
 Tighten to manufacturer-specified
torque.
 Ensure chain rings and chain ring
bolts are aligned as per manufacturer
specifications.
34
power2max
and are tightened to