Handling And Storage - Costan BELLINI 90 Mode D'emploi Pour L'utilisateur

1. HANDLING AND STORAGE

Transport carried out without pallet or wooden box
• Insert the forklift truck prongs as indicated in the two following pictures. Keep a minimum distance
between the 600 mm. prongs making sure that they are properly centered in the middle of the
cabinet.
The transport operations for the 1250 mm long cabinet, have to be carried out as follows:
Lift-up the cabinet from the rear side as much to allow the
forklift truck prongs to slide underneath.
Lift-up the cabinet from the front side and at the same time
push it as much as possible over the forklift truck prongs, in
order to place it as shown in the picture.
Tilt the forklift truck prongs as shown in the picture, in order to
avoid that the display falls over.
Moving the counter by its sides is absolutely prohibited.
5