Installation And Ambient Conditions - Costan GRANVISTA NEXT Instructions Pour L'utilisateur

ENGLISH
1. DESCRIPTION
The GRANVISTA NEXT display cabinet is available in two different heights and three different
widths. The range includes also head cabinets for the completion of back-to-back runs as well.
The cabinet is appropriate for the preservation and self-service sale of fresh and/or pre-packed
products. Its main features and dimensions are clearly illustrated in drawings 2, 3, 4 on page 10-
11. As for its weights, crating included and excluded, see table I on page 12. A wide variety of
optional accessories enabling enhanced functions is also available. To this respect, contact the
authorised after-sales service only.
2. TRANSPORTATION
The display cabinet is contained in a specially crated package that enables transportation by the
use of fork-lift trucks. Handle the machine on its own pallet or on a similar platform; use a fork
lift, either manual or electric, provided it is adequate for handling such appliances and it has the
requisite lifting capacity (see page 12 - fig. 4 and table I). Handling is reserved to the authorised
after-sales service.
3. DELIVERY AND STORAGE
Prior to accepting the case from the carrier, check the conditions of the package. If it is showing
visible damage, the machine too may have been impaired. In this case, unpack the machine in
the presence of the carrier and sign, though with reservation, the delivery bill. The manufacturer
assumes no liability for damage caused by transportation or wrong handling during storage.
Unpacking is reserved for the authorised after-sales service. Storing temperature must be between
-25°C and +55°C, air humidity between 30% and 95%. Keep the cabinet safe from direct sunli-
ght and from the elements.

4. INSTALLATION AND AMBIENT CONDITIONS

The display case must not be installed in premises containing explosive gas substances. It
can neither be used in the open nor exposed to the rain.
Before connecting the case make sure that its rating plate data correspond to the features of the
existing electrical installation (see page 13 - fig. 8 and tab. III). See installation instructions for
information relating to the type of separate refrigerant unit that must be connected to the cabinet.
For correct operation, the machine must be placed on a level floor (see page 12 - fig 5), far from
sources of heat and/or direct sunlight, doors, windows, fans or ventilation outlets (see page 12 -
fig.6). It must also be granted a reasonable free front area for customer service.
The display case must be housed in a room conforming to the ambient requirements men-
tioned in page 12 - fig. 7 and tab. II.
IMPORTANT: placing fixed panels on the top of the cabinet is advised against, as this part
must be accessible for servicing purposes.
5. ELECTRICAL CONNECTION
IMPORTANT: ahead of the case there must be a MEANS FOR DISCONNECTION FROM THE SUP-
PLY MAINS HAVING A CONTACT SEPARATION IN ALL POLES THAT PROVIDE FULL DISCON-
NECTION UNDER OVERVOLTAGE CATEGORY III CONDITIONS (see fig. 16). The position of the
27