Burning Wood; Controlling Combustion Air - Dovre TAI 45 W Installation Et Mode D'emploi

maximum amount of wood. If you use a larger quantity
of wood, the heat output increases. This can cause
the hearth to be overloaded and parts can be dam-
aged.
Allowable maximum amount of fuel when using wood
with a moisture content of 15%:
TAI 45 W/WD 9 kW can be filled with a maximum
of 2 kg wood every 45 minutes.
TAI 55 W/WD 11 kW can be filled with a maximum
of 2.5 kg wood every 45 minutes.
Do not fill the combustion chamber more than
one third full, and never stack wood above the
openings for secondary air.

Burning wood

After you have followed the instructions for lighting:
1. Slowly open the door of the appliance.
2. Spread the charcoal evenly across the bottom of
the stove base.
3. Stack a few logs on the charcoal.
Open stacking
If the logs are stacked openly, the wood will burn
quickly as the oxygen can reach each log easily. If
you want to use the stove for a short while, make an
open stack.
Subject to change because of technical improvements
Compact stacking
If the logs are stacked tightly, the wood will burn more
slowly as the oxygen can only reach some logs eas-
ily. If you want to burn wood for a longer period, make
a compact stack.
4. Close the door of the appliance.
5. Close the primary air inlet and leave the secondary
air inlet open.

Controlling combustion air

The appliance has various features for air control; see
next figure.
2
09-20500-017
Do not fill the appliance by more than a third.
09-20500-018
3
1
09-20021-115
15