Environmental Protection - Stihl GH 460 Manuel D'utilisation

If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
STIHL recommends that you have
maintenance operations and repairs
performed exclusively by a STIHL
specialist dealer.
STIHL specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– Corrosive and other resultant damage
caused by incorrect storage.
– Damage and resultant damage due to
the use of spare parts which are not
original STIHL parts.
– Damage due to maintenance and repair
operations not performed in the
workshops of authorised specialist
dealers.
15. Standard spare parts
Soft material blade disc assembly:
6012 700 5110
Hard material blade disc assembly:
6012 700 5100
Long wing blade:
6012 702 0310
Short wing blade:
6012 702 0300
Blade (x6):
6008 702 0121
Blade (x1):
6012 702 0100
68
Counter-blade:
6012 702 0500

16. Environmental protection

Shredding material should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
disposed of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life.
16.1 Disposal
Render the engine unusable prior to
disposal.
In particular, remove the ignition lead,
empty the fuel tank and drain the engine
oil.
Risk of injury from the blades.
Always store an old garden shredder in a
safe place prior to scrapping. Make sure
that the machine and the blades are kept
out of the reach of children.
17. EU - Declaration of
conformity
17.1 Petrol garden shredder
(STIHL GH)
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
the machine
shredding machine for plant trimmings
with petrol engine (STIHL GH)
manufacturer's STIHL
brand:
type: GH 460.0
GH 460.0 C
serial number 6012
conforms to the following EC directives:
2000/14/EC, 2014/30/EU, 2006/42/EC,
2011/65/EU
The product has been developed in
conformity with the following standards:
EN 13683, EN 14982
The versions of the standards valid on the
production date apply to development and
production of the products.
Applicable conformity assessment
procedure:
Appendix V (2000/14/EC)
Name and address of relevant, named
location:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
D-90431 Nürnberg
0478 216 9906 A - EN