SOLIS VAC PREMIUM 574 Mode D'emploi page 95

D Seal
Button with 2 functions with green indicator light:
1. For manually sealing film bags, f.e. when you wish to make a bag from a roll
and therefore need to seal one end of the bag.
2. For stopping the vacuuming process and immediately sealing the bag in Vacuum
& Seal function. Example: If you have selected the Vacuum & Seal function and
notice the pressure getting too high for the foods in the bag during automatic
vacuuming, you can immediately stop the extraction pump and start the sealing
process by pressing the Seal button.
As long as the appliance seals, the green control light flashes. Once the process
is completed, the green control light will go out.
E Food
With this button you can adjust the sealing process to vacuum sealing dry or wet
foods. The green light illuminates when the corresponding function is selected,
the standard setting is Dry.
Dry: Select Dry if you wish to vacuum seal dry foods. Dry is the standard setting
that illuminates once the appliance is plugged in.
Moist: Select Moist if you wish to vacuum seal moist foods like f.e. fresh meat.
The extraction pump will stop before the sealing process starts to ensure that
the seal is dry, despite the moisture. This will also prevent liquid from getting
into the appliance.
In general: Once a chosen function is completed, the corresponding con-
trol light goes out, allowing you to open the appliance cover with the
release buttons by lifting them (not pressing them down).
95