SOLIS VAC PREMIUM 574 Mode D'emploi page 94

AP P LI AN C E DE SC R I PT ION
s
A
The control panel with function buttons
For your supervision, the control light by the buttons (except the Cancel button)
illuminates and flashes, depending on the setting made (Dry or Moist) resp. the
function activated by pressing the corresponding button. Once a function has been
completed, the corresponding control light goes out.
A Pulse Vacuum
As long as you keep this button pressed, the appliance vacuums and the blue
control light illuminates. Once you stop pressing the button, the vacuuming
process will stop and the blue control light will go out. This manual vacuuming
function is ideal for highly pressure sensitive foods or items, as the vacuuming
process can be stopped at any time.
B Vacuum & Seal
Button with blue control light, which first starts the vacuuming process and then
automatically seals. In the standard setting Dry, the blue control light flashes
during the evacuation process. Once the sealing process starts, the green light
by Seal will additionally start flashing. If you have chosen the Moist setting,
the blue control light flashes during the evacuation process before lighting up
constantly once the sealing process starts. This will prompt the green control
light to start flashing as well. Once both processes are completed, both control
lights will go out.
C Cancel
Press this button during use will immediately stop the current vacuuming resp.
sealing process.
94
B C D E